Ram pumps have been used for
many decades. They are beneficial for a few reasons. Firstly, they do not need
any power for their operation which makes them eco-friendly. They work with the
force of water. Secondly, they are very simple to operate. It only needs two
parts for their operation. The principle of its working is very simple.
What is a pre-requisite to use a
hydraulic pump?
To use a hydraulic ram pump, it is needed that you have a water source
located above the pump.
Working of a hydraulic pump
You can run a water pipe from the pond into the pump. The hydraulic pump
has got a valve that enables water to flow via this pipe and increase the
speed. Once the water level reaches to its
maximum speed, then the valve slams shut. Once it shuts down, the flowing water
builds a great deal of force inside the pump because of the inertia. This pressure
forces to open a 2nd valve.
If you want to get more information follow our website.
High-pressure water when passes through the 2nd valve inside
the delivery pipe, then the pressure inside the pump reduces. The first valve
opens again to enable water to pass through and build the momentum again. This
closes the 2nd valve. This cycle continues. The delivery pipe rises
to some distance above the pump as well as the water source.
Disadvantage of hydraulic
pump
One of the major drawbacks of a ram pump is that it leads to a lot of water
wastage. It only loses 10% of the water that it consumes. It is the amount that
raises in the delivery pipe. The remaining amount of water flows outside the
pump with the development of momentum in the pipe.
Conclusion
The
unique characteristic of the
hydraulic pump is that it does not require any external power source.
No comments:
Post a Comment